Dentoo gravitas ACF Film - 1 Stück

The Dentoo gravitas ACF Film features a non-stick coated and smoother film surface for more efficient 3D printing. The specially coated underside prevents it from sticking to the LCD display. Compared to FEP and PFA films (nFEP), the Dentoo gravitas Film offers a better separation effect, which effectively increases your printing speed and success rate. Please note that you must recalibrate the zero point of the build platform. The film has a thickness of 300µm

• Lower peel forces 
  With a smoother and less sticky surface, the Dentoo gravitas Film has a lower peel force compared to FEP and PFA films (nFEP), and its durability lasts longer.
  
  
• Print faster than ever before
  Minimise your lift distance and increase your printing speed without having to worry about suction cups.
  
  
• A successful print every time
  No more failed prints, even when printing large models with fewer and thinner supports. No layer deformation at high printing speeds.

Dentoo gravitas Film

• Size: A4 (210 x 290 mm)
• Thickness: 300 μm

Notes on fitting the gravitas Film:

The Dentoo gravitas Film is applied to a blue carrier film for protection, which must be peeled off. In addition, depending on the batch, films may have a further transparent film applied on top of the blue protective film for stabilisation; this is disposed of together with the blue film accordingly.
The milky side of the Dentoo gravitas Film must be fitted so that it faces the light source/LCD display. The smooth side, which was previously mounted on the blue carrier film, faces towards the build platform or the printing material. Incorrect fitting can cause the film to tear, which in turn can lead to damage to the printer.

Please note that the Z-zero position of the printer must be recalibrated. To do this, use 3 sheets of standard 80g copy paper as a spacer. The Dentoo gravitas Film has a thickness of 300 μm!