Products from TOPDENT
No results were found for the filter!
Milling cutter MILLI-MICRON cross-cut SUPERFINE Cross-cut SUPERFINE Shank 2.35 mm For the finest finishing of non-precious alloys, precious metals and composite. The special blade geometry does not produce a hammering effect, so the milling cutter can also be used on ceramic materials.
Content 1 pcs
€13.90 *
Milling cutter MILLI-MICRON cross-cut SUPERFINE Cross-cut SUPERFINE Shank 2.35 mm For the finest finishing of non-precious alloys, precious metals and composite. The special blade geometry does not produce a hammering effect, so the milling cutter can also be used on ceramic materials.
Content 1 pcs
€13.90 *
Milling cutter MILLI-MICRON cross-cut SUPERFINE Cross-cut SUPERFINE Shank 2.35 mm For the finest finishing of non-precious alloys, precious metals and composite. The special blade geometry does not produce a hammering effect, so the milling cutter can also be used on ceramic materials.
Content 1 pcs
€13.00 *
MILLI-MICRON Bur Cross-Cut SUPERFINE Cross-cut SUPERFINE Shank 2.35 mm For the finest finishing of non-precious alloys, precious metals and composite. The special blade geometry does not produce a hammer-blow effect, which is why the bur can also be used on ceramic materials.
Content 1 pcs
€13.00 *
Okklu-Fin Bur Cross-Cut ULTRA FINE Cross-cut ULTRA FINE Shank 2.35 mm For working on occlusal surfaces. For Co-Cr alloys, non-precious alloys, precious metal and composite.
Content 2 pcs (€12.65 * / 1 pcs)
€25.30 *
QUATTRO Bur Cross-Cut STANDARD Cross-cut STANDARD Shank 2.35 mm For working on non-precious and Co-Cr alloys and for the coarse removal of all dental materials without tearing up the surface. Also ideal for the fine machining of plaster
Content 2 pcs (€5.45 * / 1 pcs)
€10.90 *
QUATTRO Cutter Cross-Cut STANDARD Cross-cut STANDARD Shank 2.35 mm For working non-precious and Co-Cr alloys and for coarse removal of all dental materials without tearing the surface. Also ideal for the fine finishing of plaster
Content 2 pcs (€5.45 * / 1 pcs)
€10.90 *
QUATTRO Cutter Cross-Cut STANDARD Cross-cut STANDARD Shank 2.35 mm For working non-precious and Co-Cr alloys and for coarse removal of all dental materials without tearing the surface. Also ideal for the fine finishing of plaster
Content 2 pcs (€5.45 * / 1 pcs)
€10.90 *
QUATTRO Cutter Cross-Cut STANDARD Cross-cut STANDARD Shank 2.35 mm For working non-precious and Co-Cr alloys and for coarse removal of all dental materials without tearing the surface. Also ideal for the fine finishing of plaster
Content 2 pcs (€5.45 * / 1 pcs)
€10.90 *
STAR Milling Cutter Spiral Toothing ULTRA FINE Spiral toothing ULTRA FINE Shank 2.35 mm Superfine, free-cutting toothing with cross-cut. Produces a fine grinding pattern on precious metals and extra-hard plastics. The spiral cut prevents clogging during work, which is why it is also...
Content 2 pcs (€5.50 * / 1 pcs)
€11.00 *
STAR Milling Cutter Spiral Toothing ULTRA FINE Spiral toothing ULTRA FINE Shank 2.35 mm Superfine, free-cutting toothing with cross-cut. Produces a fine grinding pattern on precious metals and extra-hard plastics. The spiral cut prevents clogging during work, which is why it is also...
Content 2 pcs (€5.65 * / 1 pcs)
€11.30 *
STAR Milling Cutter Spiral Toothing ULTRA FINE Spiral toothing ULTRA FINE Shank 2.35 mm Superfine, free-cutting toothing with cross-cut. Produces a fine grinding pattern on precious metals and extra-hard plastics. The spiral cut prevents clogging during work, which is why it is also...
Content 2 pcs (€5.50 * / 1 pcs)
€11.00 *