exocad Partner
Secure SSL connection
Tel: +49 (0) 7123 9595 146
Easy shopping

G 171 Otoflash UV-flash-device for Light Curing

G 171 Otoflash UV-flash-device for Light Curing
G 171 Otoflash UV-flash-device for Light Curing
G 171 Otoflash UV-flash-device for Light Curing
G 171 Otoflash UV-flash-device for Light Curing
G 171 Otoflash UV-flash-device for Light Curing
2.590,00 € *
SW10360

προσθ. ΦΠΑ. προσθ. έξοδα αποστολής

Χρόνος παράδοσης περ. 5 εργάσιμες ημέρες

Zubehör für Otoflash G171
Επαναφορά
Επαναφορά διαρρύθμισης
Easy shopping
Secure SSL connection
Free hotline service
Shopping safely
Otoflash G171  Flash-curing device for rapid and reliable curing of light curable resins...περισσότερα
Πληροφορίες προϊόντος "G 171 Otoflash UV-flash-device for Light Curing"

Otoflash G171 

Flash-curing device for rapid and reliable curing of light curable resins

The Otoflash G171 has two flashbulbs that emit light into the polymerisation chamber from below. It is therefore especially suitable for application in otoplastics/hearing aids and in the production of jewellery. The device can be used for the photopolymerisation of all light-curable materials where the curing takes place at a wavelength of 280-580 nm.

Spectral range G 171

 

Similarly, work pieces produced by means of new technologies such as 3D rapid manufacturing can be post-cured. The Otoflash G171 enables the production and processing of light curing materials of different consistencies and pigmentation, as well as repairs with corresponding materials and lacquering.

With its technical configuration, the Otoflash G171 enables short curing times: In the operating mode, two flash bulbs fitted at the bottom produce ten flashes per second. The respective light radiation at a wavelength of 280-580 nm is very intense. Compared to other methods this achieves a substantially better curing of the materials, resulting in very good physical characteristics and reduced residual monomer content (inhibition layer).

The Otoflash G171 is also deliverable with a protective gas appliance (r N2). This prevents any oxygen inhibition, surfaces are cured completely non-stick and there is no need to remove or wipe away the inhibition layer.

The Otoflash G171 has an integrated elapsed time meter, is simple to use and is extremely easy to maintain.

The Otoflash G171 are adjustable to different operational voltages (USA: 117 volt/60 Hz and Japan: 100 volt/60Hz).

Technical data: 

    • Dimensions of polymerisation chamber: 120 x 120 x 50 mm
    • Number of light sources: 2 flashbulbs à 100 w
    • Capacity: 4 BTE-aids or 6 ITE-aids
    • Rated voltage: 100, 117, 230 volt AC, adjustable by switch
    • Rated frequency: 50/60 Hz
    • Power input: 250 watt
    • Spectral distribution: 280-700 nm, maximum between 400 and 500 nm
    • Average flash power: 200 watt
    • Flash frequency: 10 flashes per second
    • Digital timer: adjustable from 1 to 9.999 flashes
    • Dimensions: 310 x 310 x 140 mm
    • Weight: 6 kg
Διαθέσιμες λήψεις:
Διαβάστε, γράψτε και συζητήστε τις αξιολογήσεις...περισσότερα
Αξιολογήσεις πελατών για "G 171 Otoflash UV-flash-device for Light Curing"
Καταγραφή αξιολόγησης
Οι αξιολογήσεις εγκρίθηκαν κατόπιν ελέγχου.
Παρακαλούμε εισάγετε την ακουλουθία αριθμών στο επόμενο πεδίο κειμένου

Τα πεδία σημειωμένα με * είναι υποχρεωτικά πεδία.

Dentoo Lab Bundle

Dentoo Lab Bundle

Κλείσιμο παραθύρου
Dentoo Lab Bundle

Dentoo Lab Bundle

Abo exocad DentalCAD Software Basis Modul
Otoflash G171 Polymerisationsgerät (Blitzlichtgerät mit Schutzgasvorrichtung) für 3D Druck
DOF EDGE
Phrozen Sonic XL 4K
13.460,03 € *
Τιμή για όλα
Εμφάνιση / Διαρρύθμιση πακέτου
Beim Speichern der Bundle-Konfiguration ist ein Fehler aufgetreten.
Abo exocad DentalCAD Software Basis Modul
- exocad -   1.690,00 € *
 
 
DOF EDGE
- DOF Inc. -   6.596,00 € *
 
Phrozen Sonic XL 4K
- Phrozen -   2.584,03 € *
Phrozen Sonic XL 4K Phrozen Sonic XL 4K
Περιεχόμενο 1 pcs
2.584,03 € *
FotoDent® denture 385 nm FotoDent® denture 385 nm
Περιεχόμενο 1 Kilo
257,37 € *
ΣΥΜΒΟΥΛΗ!
MAXI TRAY MAXI TRAY
Περιεχόμενο 1 pcs
250,00 € *
ΣΥΜΒΟΥΛΗ!
Dado Mini-Schweißlaser DaDo Mini Welding Laser
από 3.330,00 € *
KeyPrint KeyCast KeyPrint KeyCast
Περιεχόμενο 1000 Gramm (1,19 € * / 10 Gramm)
από 119,40 € *
KeyPrint KeySplint Soft KeyPrint KeySplint Soft
Περιεχόμενο 500 Gramm (0,47 € * / 1 Gramm)
από 234,00 € *
Dentoo 3D-Print Entry Dentoo 3D-Print Entry
150,00 € * 250,00 € *
ΝΕΑ
exocad DentalDB Stand-Alone exocad DentalDB Stand-Alone
από 600,00 € *
PCU LED Polymerisationsgerät PCU LED Polymerisationsgerät
από 3.810,00 € *
ΣΥΜΒΟΥΛΗ!
SOLFLEX 163 NEU SOLFLEX 163 NEU
9.999,00 € *
exocad 2.4 Plovdiv Demo exocad DentalCAD (2.4 Plovdiv) Demo/Training...
Περιεχόμενο 1 pcs
150,00 € *
ΣΥΜΒΟΥΛΗ!
SilaPart BioStar Ø 98.5 mm SilaPart BioStar Ø 98.5 mm
Περιεχόμενο 1 pcs
από 33,00 € *
Ceramill Sintron mit Schulter Ø 98.5 mm Ceramill Sintron mit Schulter Ø 98.5 mm
Περιεχόμενο 1 pcs
από 159,00 € *
KKD® Pour Stone KKD® Pour Stone
Περιεχόμενο 5 Kilo (5,48 € * / 1 Kilo)
από 27,40 € *
ASTRON CLEARsplint® ASTRON CLEARsplint®
Περιεχόμενο 120 ml (0,60 € * / 1 ml)
από 72,50 € *
AUSTROMAT 674 baSiC2 AUSTROMAT 674 baSiC2
Περιεχόμενο 1 pcs
9.740,00 € *
Subscribe to our newsletter:
follow us: