The extraction unit that talks to your milling machine – SILENT powerCAM EC.
The SILENT powerCAM EC is built for heavily utilised CAM units: via the PLC interface (RJ45), the extraction unit and milling machine communicate bidirectionally – the machine controls suction levels and filter cleaning, while the extraction unit reports its status back. This ensures unattended production, even overnight.
Economical: Bagless dust collection with no follow-up costs, disposal bags for fine milling dust, low-maintenance EC motor technology with over 5,000 operating hours – and should a motor change ever be needed, it is done in just a few minutes. At a maximum of 54.3 dB(A) it stays pleasantly quiet.
The perfect partner for your milling machines – we advise on the right interface configuration. Central multi-workstation alternative with CAM connection: Zubler Z4 VARIOmatic.
Technical data
| Device type | CAM extraction unit, bagless, 1 suction channel |
| Interface | PLC via RJ45: 2× input (suction level 1/2, off, cleaning), 2× output (status) |
| Motor | EC technology, > 5,000 operating hours, change in minutes |
| Power | 1,610 W · max. 3,984 l/min · 257 hPa vacuum · air speed 38 m/s |
| Filter | Bagless, class M (EN 60335-2-69), dust container approx. 7 l |
| Noise | Max. 54.3 dB(A) at full air flow |
| Dimensions / weight | 270 × 535 × 540 mm · approx. 18 kg · suction nozzle Ø 42 mm internal |
| Scope of delivery | Unit, quick start guide, reference card, 3 disposal bags, 2 m suction hose with end sleeves |
