Tool set initial equipment (30-piece) Silamill R5

(The tool set can only be ordered together with the delivery of a new machine, one tool set per purchased milling machine)

1x Administrated Tool Board (ATB)

Universal milling tools:
– 2 x two-flute radius cutter 0.3 mm, U030-R2-40
– 1 x cylindrical two-flute cutter 0.5 mm, U050-F2-40
– 3 x two-flute radius cutter 0.6 mm, U060-R2-40
– 2 x cylindrical two-flute cutter 1.2 mm, U120-F2-40

for wax and resin (PMMA):
– 1 x single-flute radius cutter 1.0 mm, P100- R1-40
– 1 x two-flute radius cutter 1.0 mm, P100-R2-40
– 1 x single-flute radius cutter 2.0 mm, P200- R1-40
– 1 x two-flute radius cutter 2.0 mm, P200-R2-40
– 1 x cylindrical single-flute cutter 2.5 mm, P250-F1-40

for zirconium oxide with coating:
– 1 x two-flute radius cutter 1.0 mm, Z100-R2-40
– 2 x three-flute radius cutter 2.0 mm, Z200- R3-40

for zirconium oxide with diamond coating:

– 1 x two-flute radius cutter 0.6 mm, Z060-R2D-40
– 2 x two-flute radius cutter 1.0 mm, Z100-R2D-40
– 2 x three-flute radius cutter 2.0 mm, Z200- R3D-40
– 1 x cylindrical two-flute cutter 1.2 mm, Z120-F2D-40

for composites:
– 1 x two-flute radius cutter 1.0 mm, C100-R2-40
– 2 x two-flute radius cutter 2.0 mm, C200-R2-40

for non-precious alloys on a cobalt-chromium base:
– 1 x two-flute radius cutter 0.6 mm, M060-R2-35
– 1 x two-flute radius cutter 1.0 mm, M100-R2-35
– 2 x four-flute radius cutter 2.0 mm, M200-R4-35
– 1 x two-flute cutter with torus 1.2 mm, M120-T2-35